Protective Coating - CFC Egypt (Metallurgical - Construction)

Go to content

Main menu:

Protective Coating

Construction

















.











.


CFC has a wide range of protective coating products, especially suitable for long term protection of steel and all surfaces made of concrete, render, stone, marble, wood, etc. for exterior and interior applications. Protective coating group consist of polyurethane, epoxy resin, acrylic emulsion coating and siloxane based solutions.

Polyurethane Resin
Coating

EGYCOAT PU

EGYCOAT PU is a two-component, colored protective coating for external surfaces with excellent resistance to UV radiation based on aliphatic polyurethane resins. It provides excellent glossy finish, high abrasion resistance, elasticity, good coverage and excellent adhesion to the substrate, suitable for exterior and interior applications for surfaces made of metal, concrete, render, stone, marble, wood, etc.

Rate : Approx. 100-200 g/m2 per layer, depending on the absorptivity of the substrate.

EGYCOAT PU 1K

EGYCOAT PU 1K is one-component, aliphatic polyurethane coating with excellent resistance to UV radiation, suitable for exterior & interior applications for surfaces made of wood, concrete, metal, stone, marble, etc. It provides excellent glossy finish, high abrasion resistance, elasticity, excellent resistance to UV radiation & excellent adhesion to the substrate. Classified as a surface protection coating for concrete.

Rate : Approx. 5-8 m2/kg. depends on the roughness of the substrate.

EGYCOAT V

Two-component aliphatic, solvent base, transparent polyurethane varnish that protects surfaces from graffiti & environmental impurities. It prevents the penetration of graffiti into the surface & enables cleaning them. Shows very good resistance to weather conditions. Suitable for surfaces made of concrete, render, stone, metal, marble, wood, etc.

Color : Transparent.
Rate : Approx. 100 g/m2 per layer, for 60 micron DFT.


Epoxy Resin
Coating


EGYPRO ZN 2K

Two-component anti-corrosive metallic zinc rich solvent-based epoxy coating, used as a final coat or as an anticorrosive primer coat., Typical areas of application are steel building structures, agriculture machinery, outdoor public area & steel components present in marine environments, It is classified as a product for reinforcement corrosion protection, according to EN 1504-7.

Color : Grey

EGYPRO 211 PR

Two-component, anti-corrosive, solvent-base epoxy zinc rich primer for metal surfaces. Typical areas of application are steel building structures, petrochemical plant, reinforcement bars, agriculture machinery, outdoor public area & steel components present in marine environments.

Rate : Approx. 75-150 g/m2 depends on the roughness of the substrate

EGYPRO 11 PR

Two-component, anti-corrosive, solvent-free epoxy primer for metal surfaces. Typical areas of application are steel building structures, petrochemical plant, reinforcement bars, agriculture machinery, outdoor public area & steel components present in marine environments, It is classified as a product for reinforcement corrosion protection, according to EN 1504-7.

Color : Grey

Rate : Approx. 100-250 grams/ m2
Depends on the roughness of the substrate

EGYPRO ZN 1K

One-component, anti-corrosive, solvent-based metallic zinc rich epoxy primer for metal surfaces. Used as a final coat or as an anticorrosive primer coat, Typical areas of application are steel building structures, agriculture machinery, outdoor public area & steel components present It is classified as a product for reinforcement corrosion protection, according to EN 1504-7.

Color : Grey

EGYPRO 221

Two-component, solvent-based epoxy coating. It provides high resistance to abrasion, chemical effects and weather conditions. specially designed for steel structure where superior adhesion and chemical resistance in combination with flexibility is required.

Color : Grey

Rate : Approx. 100-200 g/m2 per layer

EGYPRO GF

Two components, high solid epoxy primer with laminar fillers & glass flakes providing tortuous path through the resin binder so that the corrosive ions traveling through the binder have to travel a much longer distance. Used as an anticorrosive primer coat for steel building structures, outdoor public area & steel components present in marine environments, It is classified as a product for reinforcement corrosion protection, according to EN 1504-7.

Rate : Approx. 6-8 m2/Kg with 100 μm D.F.T

EGYTAR EP1

Two component coal tar epoxy coating system, Especially suitable for long term protection of steel and concrete substrates submerged in fresh or sea water or exposed to waste water disposal system, It provides very good adhesion to concrete and steel surfaces, excellent resistance to a wide range of industrial chemicals, high build film thickness in single coat application, it is ideally suited for sewerage treatment plants, pipes, fuel oil tanks, foundation water proofing.

Color :Black

Rate :Approx. 425 g/m2 per layer, for 250-micron DFT.

EGYTAR EP2

Two component coal tar anti-chemical epoxy coating system with very low VOC, Especially suitable for long term protection of steel & concrete substrates exposed to waste water disposal system or sea water, It provides very good adhesion to concrete & steel surfaces, excellent resistance to a wide range of industrial chemicals, high build film thickness in single coat application, it is ideally suited for sewerage treatment plants, pipes, fuel oil tanks, foundation water proofing . It follows the LEED requirements for the VOC content, VOC<150 g/l.

Color : Black

Rate : Approx. 450 g/m2 per layer, for 250 micron DFT.


Acrylic Emulsion
Coating

EGYCRYL FR

Fire-retarding, acrylic emulsion paint for interior use. It is characterized by excellent resistance against bacterial and fungal, flexibility, dirt pick-up resistance, high diffusion resistance to carbon dioxide and chlorides. excellent matte finish and strong adhesion to any kind of old or new substrate like render, concrete, plaster, wood etc.

Color : Available in various colors

EGYCRYL EX

Anti-carbonation, acrylic emulsion paint for exterior use. It is characterized by excellent weathering properties, flexibility, dirt pick-up resistance, high diffusion resistance to carbon dioxide and chlorides, excellent matte finish and strong adhesion. it is suitable for use on most exterior & interior building surfaces of old or new substrate like render, concrete, plaster, wood etc.

Color : Available in various colors


Siloxane-Based
Solution

EGYROCK W

Ready-to-use, siloxane-based transparent solution, used to impregnate & brighten up natural stone without solvents for waterproofing. It ensures extremely high water-repellence & long-term protection. it is ideally suited for various surfaces like (natural or synthetic stone, render, exposed masonry, decorative bricks, roof tiles, tiles, unpolished marble, exposed concrete etc.). It can be used even on slightly damp substrates. It is classified as a hydrophobic impregnation for surface protection of concrete, according to EN 1504-2.

Color : Clear (transparent after drying)
Rate : Approx. 200 - 400 g/m2, depending on the absorptivity of the substrate.

EGYROCK S

Ready-to-use, siloxane-based transparent varnish solution with solvents for waterproofing. It ensures extremely high water-repellence and long-term protection. it is ideally suited for waterproofing of various surfaces like (natural or synthetic stone, render, exposed masonry, roof tiles, tiles, unpolished marble, exposed concrete etc.). It is classified as an impregnation for surface protection of concrete, according to EN 1504-2.

Color : Transparent

Rate : Approx. 150 - 300 g/m2, depending on the absorptivity of the substrate.


Interested in
CFC products
Leave your request
our consultant 'll contact you
FACTORY ADDRESS
Industrial Zone, Sadat City, Cairo-Alex Desert Road, Egypt


 
(+202) 33919604 - Office
(+202) 33919605 - Fax


  
309A ElTharwa Al Madania St, Hadabt AlAhram, Giza, Egypt


 
support@cfcegypt.com
info@cfcegypt.com


CFC Egypt (c) All Rights Reserved 2020
Designed by Amira Omar IT
Back to content | Back to main menu