Concrete Repair - CFC Egypt (Metallurgical - Construction)

Go to content

Main menu:

Concrete Repair

Construction

















.











.



Concrete repair is a group of high-quality repairing systems consist of: Bonding agents, epoxy-based material and cement-based materials, Suitable for bonding and structural repairing of all types of deteriorated concrete, patching masonry and render etc.



Bonding Agent


EGYBOND SBR

EGYBOND SBR is a modified styrene butadiene rubber emulsion which improves the properties of mortars in several ways offering, e.g. increased bonding to substrate, shrinkage reduction, higher resistance to chemicals & abrasion, enhanced water impermeability etc. Ideal for creating a bonding layer between old & new concrete or mortar.

Color : White

EGYBOND Latex

Polymer latex based on SBR. used as a combined waterproofed, adhesive and plasticizer for cementitious mixes. , it increases bonding to the substrate, provides water impermeability and high flexibility. It is suitable for repairing mortars, floor screeds resistant to abrasion.

Color : White

EGYBOND L

Polymer emulsion based on SBR, bonding agent and primer for concrete and mortars which improves the properties of mortars in several ways. offering high bonding to substrate, shrinkage reduction, higher resistance to chemicals and abrasion, enhanced water impermeability etc. It is suitable for repairing mortars, floor screeds resistant to abrasion.

Color : White


Cement Based

EGYREP 1

Polymer-modified high strength repair mortar. Suitable for structural repair of deteriorated concrete, patching masonry and render etc., It provides Excellent adhesion to the substrate, due to its low weight it can be applied in vertical and overhead areas up to 10 mm thickness. It is classified as PCC R3 mortar for concrete repairs, according to EN 1504-3.

Color : Grey
Rate : Yield Approx. 13 Liter per bag 25 Kg.

EGYREP 2

Polymer-modified high strength repair mortar. Suitable for structural repair of deteriorated concrete, patching masonry and render etc., It provides Excellent adhesion to the substrate, due to its low weight, it can be applied in vertical and overhead areas up to 25 mm thickness. It is classified as PCC R3 mortar for concrete repairs, according to EN 1504-3.

Color : Grey
Rate : Yield Approx. 12 Liter per bag 25 Kg.

EGYPASTE C

Polymer-modified cement putty, extra fine-grained, for repairing and resurfacing of all types of concrete and masonry, can be applied for vertical and horizontal applications.

Color : Grey, white
Rate : Approx. 1,8 kg/m2/1mm of layer thickness.

EGYREP 2F

Polymer-modified, fiber-reinforced Excellent strength repair mortar. Suitable for General repair and restoration work on concrete, patching masonry and render etc., It provides Excellent adhesion to the substrate and can be used for repairing up to 25 mm thickness without any cracks. It is classified as PCC R3 mortar for concrete repairs, according to EN 1504-3.

Color : Grey
Rate : Yield Approx. 12 Liter per bag 25 Kg.

EGYCEM C

Is a two-component polymer -modified cementitious coating, for a smooth fair-faced render finishing. It is applied on substrates with special demands in elasticity and adhesion.

Color : White or Grey
Rate : Approx. 1,6 kg/m2/1mm of layer thickness.


Epoxy-Based
EGYPOX Putty

Three-component non-shrink epoxy putty, for puttying and bonding concrete, steel, stone, wood etc., as well as for restoring damages in concrete and cement mortars, offering very strong bonding to the substrate, good hardness and high mechanical strength. It is classified as a structural bonding product, according to EN 1504-4. It is in compliance with the LEED requirements for the VOC content, VOC<150 g/L

Color : Grey
Rate : Approx. 1.68 kg/m2 /mm of layer thickness.

EGYBOND EP

Two-component, solvent free, epoxy resin, using for bonding fresh wet cementitious materials to existing cementitious surfaces. For use on horizontal surfaces or on vertical surfaces. The long ‘open’ pot lifetime makes it suitable for use with formwork or where additional steel reinforcement must be fitted, also the product is ideal for roads, bridges, pavements, loading bays & factories, For internal & external applications.

Rate : Approx. 0.25 - 0.5 kg/m2/ layer.


Interested in
CFC products
Leave your request
our consultant 'll contact you
FACTORY ADDRESS
Industrial Zone, Sadat City, Cairo-Alex Desert Road, Egypt


 
(+202) 33919604 - Office
(+202) 33919605 - Fax


  
309A ElTharwa Al Madania St, Hadabt AlAhram, Giza, Egypt


 
support@cfcegypt.com
info@cfcegypt.com


CFC Egypt (c) All Rights Reserved 2020
Designed by Amira Omar IT
Back to content | Back to main menu